Connection to cold water or reduced voltage can extend the heating time and the programme runtime.
We recommend an external water softener for feed water hardness above 3°dH.
The installation of machines with integrated water softener requires a back flow safety device (at site) according to DVGW-DIN 1988.
Required supply pressure: with integral rinse pressure pump: 0.8 to 10 bar; without integral rinse pressure pump: 2 to 6 bar
|Cycle times*||75 / 150 / 180 sec|
|Capacity per hour*||up to 48 racks|
|Wash / rinse temperature||approx. 60 °C / approx. 82 °C|
|Tank capacity||21 l|
|Fresh water consumption / cycle||2.3 l|
|Wash pump||0.4 kW|
|Heating booster / tank||H604-10B: 5.5 (3.7**) kW / 2.5 kW; H604-12B: 6.2 (4.1**) kW / 2.5 kW; H604-33B 10 kW / 2.2 kW|
|Total loading||H604-10B: 6.0 (4.1**) kW; H604-12B: 6.6 (4.6**) kW; H604-33B 11 kW|
|Rated voltage||400V / 50hz / 3N (230V / 50hz / 1)|
|Width / Depth / Height||635 / 742 / 1,480 (1,960 open) mm|
|Loading height||440 mm|
|Rack size||500 x 500 mm|
*hot water connection
60 Hz versions are available for an extra charge (min. lot size of 5 machines).